In the last few month’s we’ve made loads of progress on the West Coast Skiff in GalGael. First we had to complete the backbone assembly. This is the central component of the boat and it’s pretty key that it’s well put together.
From our lofting we could pull the exact shape of not just the keel but the other parts that make up the backbone. In the picture above the stem, the front of the boat, is the dark piece on the left and the sternpost is the dark piece on the right. Both are made from Greenheart. The long straight section is the oak keel that we milled from the huge board. Joining the keel to the stem and sternpost at either end are the knees. These are both made from elm, the curving laminations follow the shape of the boat and ensure that they are sufficiently stong.
Once we had all these pieces made we had to assemble them, they are held together with numerous 1/2 inch thick bronze bolts. Throughout this boat we’ll be using only bronze and copper fastenings, both these metals have different purposes but are strong and have the benefit of not rusting!
While the keel was going together our dedicated teams of volunteers and participants were busy making the moulds. Each one of these is exactly patterned and shaped from the lofting to define the shape of the boat at a given position. Once the back bone was set up and ready the moulds stand on it at a given position, but first we have to set the keel up. And to do this we need a ceremony! About a traditional keel laying ceremony, next time!